Cartridge Filter Powder Coating Spray Booth

Operating Dimension

Width1500 * Depth1000 * Height1700mm 

1.Filtration                 

Uses high precision filters made from 100% polyester, effectively capature even 0.1 micron superfine powder particles,  whose cleaning is achieved by automatic pulse-jetting system controlled through soleniod valves, ensures consistent airflow and extends filter life,

2.Collecting Hopper

After booth cleaning, the accumulated powders in the filter will be discharged into a collecting hopper beneath the unit which can be rolled away for emptying and re-using. It simplifies the reclaim operation and increases the powder purity.

3. Fan

Air flow is pulled in through the open front, across the painter and parts being sprayed, and then exhausted outside through the filter 

2.2kw fan with 4000Nm3/h extraction volume control air uniformly through all the booth and recirculating back into the facility free of particle.

It is installed on the booth top to save space.

PLC Control

PLC panel offers all functions and advantages you need. It controls the fan motor stop and start, sets the pulse-jet parameters to clean the filter, lifts the bottom powder funnel, etc. A quite easy-to-use control system especially for beginners.

Top Rail and Hanger, Lights

Installed with with overhead rail and hanger to conveniently hang the work parts, as well as 2 pcs energy-saving lights to provide a bright and clear sight to powder coating jobs.