The vibratory trough finishing machine is applicable to the deburring, de-rusting, cleaning, and polishing of various metal, non-metal parts. Particularly suitable for irregular-shaped complex parts. After finishing by this vibratory finishing machine, the work parts not only maintain the original shape accuracy, but also improve the roughness.
1. The obvious advantage of the vibratory tube is for finishing large workpieces in high productivity while vibratory bowl can not achieve.
2. The vibratory tube can be divided into several smaller compartments to meet the demands of using different abrasives to operate different workpieces, also avoid them colliding with each other.
|CL-200 ||200 ||20 ||500 ||2*1.1 ||1000X400X460||1600X440X750|
*Vibratory tube finishing machine in different specifications for choice
1. At the finishing process the shape and size accuracy of the original parts will not be damaged, which can greatly improve the surface roughness of the parts.
2. Achieve semi-automatic by electric control system, sampling parts at any time during the processing of surface finishing.
3. With high wear-resistant polyurethane lined in the vibratory container to increase the service life of more than 5 times as well as avoiding collisions on the wall and and reduce the noise.
4. Installed high-performance three-phase vibration motor, adjustable amplitude range of 0.3-10mm.
5. The size of vibratory tube can be customized according to the requirements, the number of partitions in the tube can also be provided as request.
6.Provide customers free sampling of their workpieced to determine a reasonable cost-effective polishing process