COLO-800D Electorstatic powder coating machine is the best tool for wheel decorating after sandblasting, which provides a long-lasting, smooth, even, and beautiful coated surface. Marked for 10 years, this system always delivers consistent quality results with less effort, less operator training time.
3 pre-set application programs are a great help for new beginners. The flat parts program is ideal for the coating ofpanels and flat shape parts. The corner program is designed for the coating of complex shape parts such as profiles. The recoat program parts is optimized for the repair coating of parts which have already been coated.
Personalized Kvs can be digitaly adjusted within a range of 0-100kv, displayed in an accurate value, while powder feeding and supplementary air are adjusted by regulating valves.
The manual spray gun is constructed with long life and wear-resistent plastic material, and designed to balance safety and comfort after long time using.
The built-in 100kv high voltage cascade locates closely to the spray nozzle electrode for maximum charging performance, which offers best transfer efficiency and great powder savings.
|Rated output voltage||24VDC|
|Maximum output current||180Ua(max)|
|Maximum output voltage||0-100K(adjustable)|
|Maximum powder injection||600g/min|
|Maximum input-air pressure||10kg/cm|
|Optimum input-air pressure||6kg/cm|
|Optimum input-air pressure||4kg/cm|
|Maximum water vapor content or compressed air||1.4g/N m3|
|Maximum oil vapor content of compressed air||0.1ppm|
|Maximum compressed-air consumption||13.2 m3/h|
|Temperature range in use||-10 ºC+50 ºC|