Negative pressure guns are Type A, Type B, Type C, and Type K. This gun can be equipped with 8mm10mm14mm nozzles. Pressurized spray gun with 8mm10mm13mm14mm nozzle diameter, both with double inlet and single inlet1, negative pressure spray gunThere are A type, B type, C type, K type, with 6mm-14mm(b
Tombstone blasting with what equipment is betterTombstone blasting has the following two options, for reference only.Method 1: Use Open Sandblasting MachineAdvantages: Directly aim the spray gun at the tombstone to achieve lettering, fast and efficient.Disadvantages: It needs manual recovery. After
The difference between glass matte and sandblasting?Both sanding and sandblasting are performed on the surface of the glass, so that the light passes through the lampshade to form a relatively uniform scattering, and it is difficult for ordinary users to distinguish between the two processes. The fo
The sandblasting machine is used to clean the automobile hub without damaging the surface of the hub; it can completely clean the remaining old paint, scratches, scratches, oil stains, anodized layer, and electrical layer, and it is one of the refurbished and repaired contour products.
Grinding stone is widely used for vibrating (grinding) polishing machines, rolling (grinding) polishing machines, and also for abrasives in other (grinding) polishing machines such as centrifugal (grinding) polishers, vortex (abrasive) polishers, etc. .
As we know, the so-called wet blasting machine uses slurry (abrasive and water mixture) as the finishing media, which is evenly stirred by the slurry pump. Compressed air acts as the acceleration power to feed the slurry to the spray gun and blast out to the object surface through the nozzle for the
The vibration grinder motor burned out the solution: Vibration grinders are generally very stable in quality and rarely subject to after-sales problems. A recent case has been shared for everyone:Due to the long-term vibration of the grinder, the bolts on the motor will be loose to some extent. When
Dust collector of sandblasting equipment, exports to Europe and America.
The cutting force of different polishing media is different, corundum> resin> high alumina porcelain> high frequency porcelain = steel ball.
1, Must wear protective equipment before sandblast working, not allowed to work in bare, operators not less than two people.2, Gas tank, pressure gauge, safety valve must to be regularly checked. The storage tank emits dust once every two weeks and the filter in the sand tank have to be checked once